High power thyristor for inverter applications All diffused structure(TQ<10US)
- Product Description
-
HIGH POWER THYRISTOR FOR INVERTER APPLICATIONS
YZPST-R0929LC10 (TQ<10US)
Thyristor Features:
. All Diffused Structure
. Interdigitated Amplifying Gate Configuration
. Guaranteed Maximum Turn-Off Time
. High dV/dt Capability
. Pressure Assembled Device
ELECTRICAL CHARACTERISTICS AND RATINGS
Blocking - Off State
VRRM (1)
VDRM (1)
VRSM (1)
1000
1100
1200
VRRM = Repetitive peak reverse voltage
VDRM = Repetitive peak off state voltage
VRSM = Non repetitive peak reverse voltage (2)
Notes:
All ratings are specified for Tj=25 oC unless otherwise stated.
(1) All voltage ratings are specified for an applied
50Hz/60zHz sinusoidal waveform over the
temperature range -40 to +125 oC.
(2) 10 msec. max. pulse width
(3) Maximum value for Tj = 125 oC.
(4) Minimum value for linear and exponential waveshape to 80% rated VDRM. Gate open. Tj = 125 oC.
(5) Non-repetitive value.
(6) The value of di/dt is established in accordance with EIA/NIMA Standard RS-397, Section 5-2-2-6. The value defined would be in addition to that obtained from a ubber circuit,comprising a 0.2 mF capacitor and 20 ohmsresistance in parallel with the thristor under test.
Repetitive peak reverse leakage and off state leakage
IRRM / IDRM
15 mA
70 mA (3)
Critical rate of voltage rise
dV/dt (4)
200 V/msec
Conducting - on state
Parameter
Symbol
Min.
Max.
Typ.
Units
Conditions
Max. average value of on-state current
IT(AV)M
929
A
Sinewave,180o conduction,Tc=55oC
RMS value of on-state current
IT(RMS)m
1893
A
Nominal value
Peak one cPSTCle surge
(non repetitive) current
ITSM
-
9.0
kA
kA
8.3 msec (60Hz), sinusoidal wave-
shape, 180o conduction, Tj = 125 oC
10.0 msec (50Hz), sinusoidal wave-
shape, 180o conduction, Tj = 125 oC
I square t
I2t
405x103
A2s
8.3 msec
Latching current
IL
-
mA
VD = 24 V; RL= 12 ohms
Holding current
IH
1000
mA
VD = 24 V; I = 2.5 A
Peak on-state voltage
VTM
2.04
V
ITM = 1400 A
Critical rate of rise of on-state
current (5, 6)
di/dt
1500
A/ms
Switching from VDRM £ 1000 V,
non-repetitive
Critical rate of rise of on-state
current (6)
di/dt
1000
A/ms
Switching from VDRM £ 1000 V
Gating
Parameter
Symbol
Min.
Max.
Typ.
Units
Conditions
Peak gate power dissipation
PGM
30
W
Average gate power dissipation
PG(AV)
2
W
Peak gate current
IGM
-
A
Gate current required to trigger all units
IGT
300
mA
VD = 10 V;IT=3A;Tj = +25 oC
Gate voltage required to trigger all units
VGT
3.0
V
VD = 10 V;IT=3A;Tj = +25 oC
Peak negative voltage
VRGM
5
V
Dynamic
Parameter
Symbol
Min.
Max.
Typ.
Units
Conditions
Delay time
tgd
1.0
-
ms
VD=67% VDRM, IT=2000A, di/dt=60A/us, IFG=2A, tr=0.5us, Tj=25C
Turn-on time
tgt
2.0
-
Turn-off time (with VR = -5 V)
tq
-
10
-
ms
ITM=1000A, tp=1000us, di/dt=60A/us, Vr=50V, Vdr=33%VDRM, dVdr/dt=200V/us
Reverse recovery current
Irm
-
A
ITM=4000A, tp=2000us, di/dt=60A/us
THERMAL AND MECHANICAL CHARACTERISTICS AND RATINGS
Parameter
Symbol
Min.
Max.
Typ.
Units
Conditions
Operating temperature
Tj
-40
+125
oC
Storage temperature
Tstg
-40
+150
oC
Thermal resistance - junction to case
RQ (j-c)
-
-
K/kW
Double sided cooled
Single sided cooled
Thermal resistamce - case to sink
RQ (c-s)
-
-
K/kW
Double sided cooled *
Single sided cooled *
Thermal resistance - junction to case
RQ (j-s)
32
64
K/kW
Double sided cooled
Single sided cooled
Mounting force
F
10
20
-
kN
Weight
W
-
Kg
about

Product Inquiry
We will contact you within one working day. Please pay attention to your email.
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.